The BLU G90 has received TWRP Recovery version 3.4.0-0, with credit for this performance to Mrmazak, a senior member of the XDA. If you own a Blu G90 G0310WW and you want to install this rugged smartphone, you’re on the right track. If you want to perform TWRP Recovery 3.4.0 in root and flash mode on your device, please follow our manual.
If you are an Android enthusiast and want to install TWRP recovery on your favorite computer, you have come to the right page. In this article we inform you about the installation process of TWRP and Root Blu G90 G0310WW.
The TWRP is designed from materials and has an attractive user interface (UI). This manual allows you to install the latest version of TWRP for Blu G90 G0310WW. You can download TWRP Recovery via the links in the foreword of this article. Note: this is an unofficial TWRP repair and only applies to the Blu G90 G0310WW (confirm the model by going to Settings>About). The procedure below is only for routing and installing TWRP on Blu G90 G0310WW, do not test this method on other devices.
If you want to exploit the full hardware potential of your Blu G90 G0310WW, the most important task is routing and TWRP firmware. Replacement ROMs often have limited and unsupported adaptation functions. If you have a root device and a flashing TWRP repair, you can install any custom ROM, modules, kernel, Xposed, etc., as well as many applications that need superuser access to work properly.
Brief description and benefits of TWRP Recovery
TWRP (Team Win Recovery Project) – open source, community development project. The TWRP firmware allows your device to install any firmware, download smartphones, change zip files for settings, Xposed modules for settings, root and unroot processes in a single click. You can also make a full backup of Nandroid and restore it later with a single click, delete the image file, remove bloatware, overlock and underclock. TWRP allows you to easily erase data, cache and data after an image file flashes to display changes and correct minor cache errors.
To install TWRP, your Blu G90 G0310WW must have a bootloader enabled. This means that you must first unlock the bootloader for the main control of the device and make all settings.
Exclusion of liability : AndroidWeblog.com covers everything, albeit in a very neat way, so that our readers get exactly what they want, but there is still a modest chance that the most important questions that may arise here will be answered. It is therefore in the user’s interest to follow the steps very carefully in order to avoid accidents with your device.
Routing and flashing the custom ROM firmware will undoubtedly invalidate the warranty of your devices and AndroidWeblog.com is in no way responsible for the invalidity of the warranty or the brick of the devices.
Building
Check the model number of the model you want to use:
ALWAYS learn to install the roots of the Oukitel C11 Pro and TWRP Restore.
You must ensure that you have read the disclaimer carefully before forwarding your phone and that you agree to do so at your own risk.
The phone must be 70% charged, otherwise it may lead to complications during testing. Why take the risk? Try charging it.
If you use a basic phone or if you want to install a custom ROM, it’s a good idea to back up your phone. Back up all your media – photos, videos and more – to your PC and contacts in the cloud.
You need to enable the USB debugging option by going to Settings, Applications, and Developer Options.
Routing Downloads Blu G90 G0310WW
Download the VCOM USB MediaTek drivers (MT6xxx_USB_VCOM_drivers. zip) here.
Download the TWRP recovery for the Blu G90 G0310WW here.
TWRP Recovery 3.4.0.0 (link yadi.sk)
Download Chainfire SuperSU from here.
Download Magisk Manager from here.
Download here the latest version of the SPFlash tool for Windows
Firmware/installation steps for TWRP Recovery 3.4.0 on Blu G90 G0310WW
Step one: Start downloading all the above files in the required field.
Step two: Examine the downloaded files and then right click on the archived MT6xxx_USB_VCOM_drivers file. Zip and pull the same one. Then navigate to the unzipped folder and click on the InstallDriver exe file. A VCOM charger will be installed on your system.
Step three: Assuming you have downloaded SP FlashTool (Win) from the link above, just click on the archive and unpack it. Then look at the flash_tool. exe file and run it.
alt=SP Flash Tools Files width=850 height=490 data-ezsrc=http://www.androidweblog.com/wp-content/uploads/2017/06/SP-Flash-Tool-AW.jpg data-ez= />
Step four: Find the scatter file of the TWRP zip file you downloaded. Rename the TWRP (.img) file to recovery.img. Locate the scatter file from the extracted Stock ROM folder (Download Stock ROM for your G90 G0310WW Blu smartphone) in the Flash Tool user interface and select the scatter file.
alt=SP Flash Tool Scatter File width=852 height=557 data-ezsrc=http://www.androidweblog.com/wp-content/uploads/2017/06/SP-Flash-Tool-Select-Scatter-File-AW.jpg data-ez= />
Step five: Leave the recovery at this point in the form of a ticket/check. Now click on the Location tab in the Location field and find a custom recovery image file specific to the device (as shown in the figure above). Then click on the download button.
Step 6 : Now connect the Blu G90 G0310WW to the computer via the USB port. When the smartphone is connected, the flashing starts automatically and lasts only a few seconds.
Step seven: At this point, the custom recovery has flashed on your device. You can now disconnect the device from your computer. You must now activate/reboot your TWRP recovery device. To do this, start the unit by pressing and holding the volume knob. Please note that key combinations may vary depending on the model of your device and you can confirm the correct key combination for your Blu G90 G0310WW. The Volume Up button also starts the boot mode on some devices, which has a menu to switch to recovery mode. The volume up and down keys can be used as key combinations. That’s it, you managed to flash TWRP on your Blu G90 G0310WW.
Rooting procedure Blu G90 G0310WW/Installation magisc or SuperSU
Make sure you have downloaded SuperSU or Magisk Manager (link in the required section of this article) Then continue climbing the stairs.
Attention: You can use Magisk Manager or Super SU, but only one, so choose well. Log in to Magisk Manager if you’re not sure.
Step one: Transfer the downloaded SuperSU.zip or magisk.zip file to the internal memory / SD card of your Blu G90 G0310WW smartphone.
Step two: All you have to do now is charge for the repair. An additional backup of the ROMs can be made via the TWRP interface. Nevertheless, I advise you to support the ROM. Because if the process fails, you can make the ROM blink.
alt=TWRP 3 install;0 width=850 height=490 data-ezsrc=http://www.androidweblog.com/wp-content/uploads/2017/06/TWRP-Recovery-3-0.jpg data-ez= />
Step three: Touch Install, then go to SuperSU.zip or magisk.zip and rotate your finger over the firmware confirmation file (at the bottom of the screen). The Magisk/SuperSU flash process has started and will take a few seconds.
Congratulations, you’re now rooted in the Blu G90 G0310WW, and you’ve also made the TWRP shine. Now you can install the Xposed frame and customize your smartphone to your needs. If you want to check, you can download and check the root status using the Root Checker application.
Related Tags:
